| rameters | GMC5025 | GMC6025 |
| Work table size (width × length) (mm) | 2300×5000 | 2300×6000 |
| Stroke in the moving direction of the table (X-axis mm) | 5000 | 6000 |
| Stroke in the moving direction of the spindle carriage (Y-axis mm) | 2700(side stroke 3050) | 2700(side stroke 3050) |
| Stroke in the up and down movement direction of the spindle (Z axis mm) | 1000 | 1000 |
| Gantry width (mm) | 2700 | 2700 |
| Gantry is too high (mm) | 1400 | 1400 |
| Distance from spindle end face to work table (mm) | 340-1340 | 330-1330 |
| Table T-slot (number - size x spacing) | 11-28×200 | 11-28×200 |
| Spindle Specifications (Model/Installation Diameter) | BT50/Φ210 | BT50/Φ210 |
| Spindle transmission mode | belt | Speed 6000r/min | Speed 6000r/min |
| the transmission ratio is 1.5:1;(optional 1.5:1) | the transmission ratio is 1.5:1;(optional 1.5:1) |
| ZF deceleration + belt (optional) | The speed is 6000r/min and the transmission ratio is 4:1; | The speed is 6000r/min and the transmission ratio is 4:1; |
| Gear Head (Weimars) | speed 6000r/min, Transmission ratio 4.4:1 | speed 6000r/min, Transmission ratio 4.4:1 |
| Rapid traverse feed rate (m/min) | 10 | 10 |
| Cutting feed rate (m/min) | 6 | 6 |
| X, Y, Z axis ball screw specifications/pitch | X:8020, Y:6316, Z:5010 | X:8020, Y:6316, Z:5010 |
| X, Y, Z axis guide rail specifications / number of sliders | X axis: roller guide 55/14; | X axis: roller guide 55/14; |
| Y axis: roller guide 55/4; | Y axis: roller guide 55/4; |
| Z axis: rectangular slide | Z axis: rectangular slide |
| X, Y, Z axis servo motor transmission mode and transmission ratio | X-axis planetary gear transmission 4:1 X-axis planetary gear transmission 3:1 Z-axis direct drive 1:1 (Optional X-axis belt drive
2.5:1; Y-axis direct drive 1:1; X-axis direct drive 1:1) | X-axis planetary gear transmission 4:1 X-axis planetary gear transmission 3:1 Z-axis direct drive 1:1 (Optional X-axis belt drive
2.5:1; Y-axis direct drive 1:1; X-axis direct drive 1:1) |
| Spindle motor selection recommendation | 22kW wide area motor | 22kW wide area motor |
| X, Y, Z three-phase servo motor recommendation | ≥ X:50N m; Y:40N m; Z:30N m (brake) | ≥ X:50N m; Y:40N m; Z:30N m (brake) |
| Optical machine dimensions | 10555x5130x4300 | 12420x5130x4300 |
| (length × width × height) (mm) |
| Workbench load (t) | 15 | 18 |
| Light machine weight about (t) | 44 | 51 |
